The original screen, the original LCD screen, the original disassembly incel, and the market circulation type original screenDJ UN original BOE original Tien Ma original Intel originalAt this point, do you find yourself confused? Before we can get a grasp on the screen market of Y20, we need to get a better understanding of the screen quality market, as well as the circulation type, original screen, original disassembly, and incel markets. It's possible that you've given a lot of thought to a wide variety of perspectives, but you still can't seem to arrive at a conclusion that can be relied upon. In this case, it's important to remember that there's no right answer.

In point of fact, the complex Chino is unable to provide an explanation of the specifics to you at this time because of the nature of the situation. BOE djn was charged the required quantity of lux to compensate for the expenditures associated with the shipment of the Y20 screen order that was placed by Vivo. At any given time, the screen wiring and resistance particulars can be found to have a few different variations.

This particular television has a screen that is 51 inches in size, a resolution that is full HD, an LTPS LCD module, and the manufacturer's very own proprietary underlying code. Because of this, genuine original screens never have transcoding chips; however, the versatility of screens produced by various original manufacturers can vary greatly depending on the manufacturer. Authentic original screens never have transcoding chips. On the other hand, these three channels only broadcast a limited number of first-run programs that are made especially for them. These programs do not air on any other channel. Because of this, the number of people who are involved in the process of original disassembly is relatively low. This is a direct tft panel of the situation.  It was mentioned earlier in this discussion that the recycling screen of the broken cover plate has a low recycling value, which also results in a low profit and a low cost performance. This was due to the fact that the recycling screen is made out of broken pieces of the cover plate. Needs additional citations

As the very last step in your investigation, you need to look into the supply chain for gray market goods. As a result of China's increasingly stringent control over the chain of supply for raw materials, there is a significant limit placed on the amount of each new batch of raw material that can be exported from China. This limit is extremely restrictive. After these recently unearthed raw materials have left China through the back door, the nation waits for the next shipment to come in before moving on to the next step. First things first, let's take a look at the screen that came packaged along with the original equipment manufacturer (OEM).

If the screen your supplier sells claims to be the original screen, then the screens were most likely manufactured by the original equipment manufacturer (OEM). This is supported by evidence, as original equipment manufacturer (OEM) screens, in addition to original screens, are also ordered from BOE and other domestic companies. Original screens also continue to be ordered. Additionally, orders for original screens are still being taken. The most significant difference is that the factory won't be able to start production of the driving scheme until after they have made a payment, which will happen after they have obtained the original LCD module. This is the most important difference.

Because Vivo is unable to release its own core code, the only option available to you is to devise a strategy for driving on your own. The implementation of a transcoding chip may lead to cost reductions, which is always a welcome outcome. When the transcoding translation interface has been written, the series of codes that have already been written can be used to adapt to the actual quality of the IC driving scheme. This can be done after the transcoding translation interface has been written. This is feasible as a result of the fact that the interface for transcoding and translation has already been written. The term "in cell screen" refers to the initial LCD module screen that was displayed by transcoding chips. This screen is known as the "in cell screen."On the other hand, if you want to be more precise about it, you can refer to it as the in-cell screen. This term refers to displays that were created by the original equipment manufacturer. Following that, we will talk about the first screen that was used in the original equipment manufacturer screen. Neither the original screen nor the OEM screen Y20 has a transcoding chip. Neither does the replacement screen. Neither does the screen that was replaced it with. Neither does the screen that was installed in its place after it was removed. It makes use of each and every one of those six. It will be possible to differentiate between the various adjustments that are made to the display's level of brightness.

Because of the differences between them, the adaptability of each driving strategy will be affected in a variety of different ways. These effects will be unique to each driving strategy. Why are the sizes of different screen models not consistent with one another, despite the fact that the typical size of a screen is 6.51 inches? Why does it seem that the size of the initial screen that is sold in the after-sales market almost never precisely matches the size of the screen that was installed when the product was initially sold? At the tail end of this year, the successful entrepreneur made the surprising discovery that hand stars are able to produce the screen mold. This was an exciting discovery.

47 centimeters. Because this LCD module is capable of high definition, the picture that is displayed will be very sharp and detailed. The price is lower, the resolution is lower, and the window that it displays in is smaller. Additionally, the window is smaller. It is important that we are made aware of the numerous ways in which the screen of a mobile device differs from that of a desktop computer.

In contrast, the term "mobile screen" is used much less frequently than "intel screen," which most likely means that everyone is familiar with the former term. There are mobile screens on the market that can be purchased for a low cost, but it is unclear whether or not they are reliable. The touch circuit for the mobile screen is installed on the exterior of the LCD module, small tft display whereas the touch circuit for the mobile screen is installed on the interior of the LCD module. In order for workers in the circuit group who are on the surface to be able to touch the laminated cover plate, they must first laminate with oka and wipe with alcohol. Only then will they be allowed to touch the plate. After that, they are allowed to put their hands on the plate. If it were to fall and crack the cover plate, there is a greater possibility that the touch circuit would also be broken. This is because both of these things are connected. This is because there is a connection between both of these things. Why did we waste our time creating twenty different samples if we were only going to go into detail about six of them?

The manufacturing facility's expenses and sales prices have switched places as of the end of the preceding year, and the total number of cell screens that have been produced has decreased by more than 40 since that time. Because of this, neither upstream peers nor factories are eager to make use of new LCD modules in order to produce new screens. This is a direct consequence of the situation.  As a result of this, it would appear that the present moment is an appropriate time to begin preparing goods for the second half of the year. This can be deduced from the fact that:LCD modules with a size of 517 inches, which are used in the screens of laptops and in integrated circuits, should begin to stabilize. This is an important step in the manufacturing process.